SG90 9g Mini Servo
search
  • SG90 9g Mini Servo
  • SG90 9g Mini Servo
  • SG90 9g Mini Servo
SG90 9g Mini Servo
  • SG90 9g Mini Servo
  • SG90 9g Mini Servo
  • SG90 9g Mini Servo

SG90 9g Mini Servo

R49.00
Tax included

The SG90 9g 180° micro servo is a compact, lightweight analog servo for small RC planes, park flyers, foam board models, micro cars and robotics projects, offering usable torque on 4.8V to 6V with a standard 3 pin JR connector and a full set of servo horns and mounting screws included.

Quantity
In Stock

  Secure and Safe Payment Methods

Using Payfast's multi payment Secure Gateway

  Fast Reliable Shipping

Choose between Pickup, The Courier Guy or Fastway Couriers.

  Unrivalled Service and Satisfaction

Fast response times, expert support, and dependable results.

Contact us for quotes on larger quantities

The SG90 9g 180° micro servo is a popular choice for lightweight RC aircraft, small RC cars and general hobby projects where space and weight are limited but you still need precise control. Running on 4.8V to 6V, it delivers usable torque and quick response in a compact 9g case, making it a good match for foam board wings, small balsa models, park flyers and simple steering or throttle setups. A standard 3 pin JR style connector on a 25cm lead means it plugs directly into most modern RC receivers and flight controllers.

With an operating angle of up to 180° and typical speeds around 0.1sec/60° at 4.8V, the SG90 handles small control surfaces like ailerons, elevators and rudders on light models, as well as pan tilt brackets and simple robot joints. Plastic gears keep the weight down while still providing enough strength for small linkages when installed and driven correctly. The servo case dimensions of roughly 23mm x 12.2mm x 29mm allow it to fit neatly into tight fuselages and servo bays sized for common 9g form factor servos.

For RC builders the SG90 is a cost effective way to equip multiple small models or to keep a few spare servos in the flight box for field repairs. Each servo is supplied with a set of arms, mounting screws and a horn screw so you can bolt it straight into your model and hook up existing pushrods or control hardware without hunting for extra fittings.

Typical uses

  • Aileron, elevator and rudder control on small foam board and park flyer aircraft
  • Steering and simple functions on small RC cars and boats
  • Pan tilt brackets for FPV cameras and lightweight gimbals
  • Robotic arms, grippers and general motion control in DIY electronics projects

Key features

  • Standard SG90 9g micro analog servo with 180° operating angle
  • Suitable for 4.8V to 6V operation from typical RC receivers and BECs
  • Torque around 1.8kg/cm at 4.8V and 2.2kg/cm at 6V (typical values)
  • Approximate speed of 0.1sec/60° at 4.8V and 0.08sec/60° at 6V
  • Durable plastic gears in a compact 23mm x 12.2mm x 29mm case
  • Standard 3 pin JR style connector with about 25cm lead length
  • Ideal for small RC aircraft, micro cars, pan tilt systems and robotics
  • Includes SG90 9g servo, servo horns and mounting screws
TP-SG90
20 Items

SG90 9g Mini Servo FAQ

The SG90 9g 180° servo is ideal for lightweight RC planes, small RC cars and robotics projects where space and weight are limited. It works well on small control surfaces like ailerons, elevators and rudders on foam board or park flyer models, as well as for steering, pan tilt brackets and simple robot joints.
The SG90 operates on 4.8V to 6V and provides around 1.8kg/cm torque at 4.8V and 2.2kg/cm at 6V, with typical speeds of 0.1sec/60° at 4.8V and 0.08sec/60° at 6V. This makes it a good match for small control loads and light linkages, but it is not intended for large or heavily loaded control surfaces.
The servo comes with a standard 3 pin JR style connector on a 25cm lead, which is compatible with most modern RC receivers and control boards. In the pack you also get a set of servo horns and mounting screws, so you can mount it directly into your model and connect it to your existing pushrods or linkages.