Savox SG-0351 Digital Standard Servo
R339.00
Tax included
The Savox SG-0351 is a standard size digital servo with industrial plastic gears, dual ball bearings and a brushed DC motor, delivering up to 4.1kg/cm torque and 0.17sec/60° speed at 6V, ideal for throttle, steering and primary controls on sport aircraft, park flyers, helicopters and 1/10 scale cars running on a typical 4.8V to 6.0V receiver supply.
Secure and Safe Payment Methods
Using Payfast's multi payment Secure Gateway
Fast Reliable Shipping
Choose between Pickup, The Courier Guy or Fastway Couriers.
Unrivalled Service and Satisfaction
Fast response times, expert support, and dependable results.
The Savox SG-0351 Digital Standard Servo is a reliable standard size servo for general RC use where smooth proportional control and consistent centering matter more than extreme torque numbers. It uses a brushed DC motor driving industrial grade plastic gears, supported by dual ball bearings on the output shaft for reduced friction and stable operation. Running on a typical receiver voltage of 4.8V to 6.0V, it delivers around 3.2kg/cm torque at 4.8V and up to 4.1kg/cm at 6.0V, with a transit speed of 0.22sec/60° at 4.8V and 0.17sec/60° at 6.0V.
With standard dimensions of 40.7 × 20.0 × 37.0mm and a weight of 41g, the SG-0351 drops straight into most standard servo mounts in sport planes, trainers, helicopters and 1/10 scale cars. A 25 tooth output spline makes it compatible with common servo arms and horns, and the 300mm three wire lead with JR style connector plugs directly into most modern receivers and gyro systems. The servo is specified to operate from -10°C to 50°C with a 240Hz refresh rate, giving predictable behaviour across a range of conditions.
In practical RC setups the Savox SG-0351 works well as a throttle or auxiliary servo in larger glow and gas models, a primary control servo in smaller electric sport planes and park flyers, or as a steering and throttle servo in 1/10 scale surface models. It offers a sensible balance of torque, speed and durability for everyday flying and driving, without the cost or power draw of high voltage high torque units.
Typical uses
- Throttle, nose wheel steering or auxiliary functions in sport and scale aircraft
- Elevator, rudder or ailerons on lighter electric trainers and park flyers
- Steering and throttle duty on 1/10 scale RC cars and trucks
- General purpose standard servo for club models and multi role airframes
Key features and specifications
- Standard size Savox SG-0351 digital servo with brushed DC motor
- Industrial plastic gear train with dual ball bearings for smooth, low friction operation
- Operating voltage 4.8V to 6.0V from a typical receiver or BEC supply
- Torque: 3.2kg/cm (44.4oz-in) at 4.8V and 4.1kg/cm (56.9oz-in) at 6.0V
- Speed: 0.22sec/60° at 4.8V and 0.17sec/60° at 6.0V
- Dimensions: 40.7 × 20.0 × 37.0mm, weight: 41.0g
- Operating temperature range from -10°C to 50°C, refresh rate 240Hz
- Running current (no load) approx. 100mA at 4.8V and 120mA at 6.0V, stall current up to 800mA at 4.8V and 1000mA at 6.0V
- Standard 25 tooth output spline, JR style connector and about 300mm lead length
- Supplied complete with 1 x Savox SG-0351 Standard Digital Servo and standard hardware
SG-0351
5 Items
Savox SG-0351 Digital Standard Servo FAQ
The Savox SG-0351 is a standard size digital servo that works well in sport and scale RC aircraft, helicopters and cars where you need reliable, precise control without going to a high torque or high speed race servo. It is a good choice for primary controls such as elevator, rudder or ailerons in typical electric and glow sport models, as well as steering and throttle in 1/10 scale cars and general purpose surface models.
The SG-0351 is designed to run from a typical 4.8V to 6V receiver supply, driven by a standard 3 wire servo lead carrying signal, positive and ground. It plugs straight into most modern RC receivers and flight controllers, and will happily run from the BEC on a typical ESC or from a dedicated receiver pack, as long as the supply stays within its rated voltage range.
A digital servo such as the SG-0351 refreshes the motor more frequently than an analog servo, which improves holding power around centre and makes small stick inputs feel more precise. In practice that means better centering on elevator and rudder, more consistent tracking through turns and less trim drift over a flying session or race day, which is useful on sport aircraft, helicopters and cars where feel and repeatability matter.
If a product is marked In Stock on our website, it means we physically have the item in stock with us in South Africa and it is ready to ship. If a product is marked Out of Stock, then it is not currently available. You can also check the Product Details tab on the page to see the current stock quantity. We are not a drop shipper, the stock status shown on our site reflects what we actually have on hand.
The Savox SG-0351 is a standard size digital servo with industrial plastic gears, dual ball bearings and a brushed DC motor, delivering up to 4.1kg/cm torque and 0.17sec/60° speed at 6V, ideal for throttle, steering and primary controls on sport aircraft, park flyers, helicopters and 1/10 scale cars running on a typical 4.8V to 6.0V receiver supply.